DVD-01
Ansoft Videos
1_Installation Videos
2_ANSYS License Managment
3_ANSYS Elastic Licensing
ANSYS AIM
Tutorials
AIM_R16_WS01_Exhaust_Manifold.pdf
AIM_R16_WS01_Exhaust_Manifold.zip
AIM_R16_WS02_Rear_Spoiler.pdf
AIM_R16_WS02_Rear_Spoiler.zip
AIM_R16_WS03_Electronic_Board.pdf
AIM_R16_WS03_Electronic_Board.zip
AIM_R16_WS04_Wind_Turbine.pdf
AIM_R16_WS04_Wind_Turbine.zip
AIM_R16_WS05_Heat_Sink.pdf
AIM_R16_WS05_Heat_Sink.zip
AIM_R16_WS06_Soldering_Iron.pdf
AIM_R16_WS06_Soldering_Iron.zip
AIM_R16_WS07_Butterfly_Valve.pdf
AIM_R16_WS07_Butterfly_Valve.zip
AIM_R16_WS08_Jounaling_Scripting.pdf
AIM_R16_WS08_Jouranling_Scripting.zip
AIM_R16_WS09_Pipe_Assembly.pdf
AIM_R16_WS09_Pipe_Assembly.zip
Video Lessons
ANSYS AIM Expressions- Custom Results Variable Boundary Conditions Location Selection.mp4
ANSYS AIM Results- Calculated Values.mp4
ANSYS AIM Results- Contours on Streamlines.mp4
ANSYS AIM and ANSYS SpaceClaim Importing a Geometry.mp4
ANSYS AIM- Design Points Dashboard Design Points Tab.mp4
ANSYS AIM- Design Points Dashboard Parameters Tab.mp4
ANSYS AIM- Assigning Materials and Defining Material Properties.mp4
ANSYS AIM- Configuring Joints and Joint Properties.mp4
ANSYS AIM- Convergence Tips for a Fluid Flow Simulation.mp4
ANSYS AIM- Creating Reference Frames.mp4
ANSYS AIM- Defining Locations.mp4
ANSYS AIM- Defining and Using Selection Sets.mp4
ANSYS AIM- Design Points Dashboard Basic Design Point Operations.mp4
ANSYS AIM- Design Points Dashboard Parallel Chart - Part I.mp4
ANSYS AIM- Design Points Dashboard Parallel Chart - Part II.mp4
ANSYS AIM- Determining Die Lip Shape Using a Polymer Extrusion Simulation.mp4
ANSYS AIM- Fatigue Analysis (1).mp4
ANSYS AIM- Fatigue Analysis.mp4
ANSYS AIM- Fluid Flow Physics Overview.mp4
ANSYS AIM- Fluid-Solid Heat Transfer.mp4
ANSYS AIM- Fluid-Structure Interaction.mp4
ANSYS AIM- Generating Contacts.mp4
ANSYS AIM- Geometry Modeling.mp4
ANSYS AIM- Getting Started - Part 1.mp4
ANSYS AIM- Getting Started - Part 2.mp4
ANSYS AIM- Locations.mp4
ANSYS AIM- Materials.mp4
ANSYS AIM- Modal Structural Physics Overview.mp4
ANSYS AIM- Named Expressions and Named Values.mp4
ANSYS AIM- Nonlinear Contacts.mp4
ANSYS AIM- Nozzle Design Optimization Part 1.mp4
ANSYS AIM- Nozzle Design Optimization Part 2.mp4
ANSYS AIM- One Way Fluid Structure Interactions Overview.mp4
ANSYS AIM- Predicting Extrudate Shape Using a Polymer Extrusion Simulation.mp4
ANSYS AIM- Selection Sets.mp4
ANSYS AIM- Static Structural Physics Overview.mp4
ANSYS AIM- Steady State Thermal Electric Conduction Overview.mp4
ANSYS AIM- Steady-State Thermal Physics Overview.mp4
ANSYS AIM- Thermal Electric Conduction Physics Overview.mp4
ANSYS AIM- Thermal Stress from a Fluid-Solid Heat Transfer Solution.mp4
ANSYS AIM- User Assistance.mp4
ANSYS AIM- Viewing Results.mp4
ANSYS AIM- Volume Creation and Volume Meshing.mp4
ANSYSAIM_160_CappingSurfaces.mp4
ANSYSAIM_160_Connections.mp4
ANSYSAIM_160_Convergence.mp4
ANSYSAIM_160_Expressions_Location.mp4
ANSYSAIM_160_FSIOverview.mp4
ANSYSAIM_160_FluidFlowOverview.mp4
ANSYSAIM_160_Locations.mp4
ANSYSAIM_160_Materials.mp4
ANSYSAIM_160_ModalStructuralOverview.mp4
ANSYSAIM_160_NamedExpressionsValues.mp4
ANSYSAIM_160_ResultsCalculatedValues.mp4
ANSYSAIM_160_ResultsContoursonStreamlines.mp4
ANSYSAIM_160_ResultsViewing.mp4
ANSYSAIM_160_SelectionSets.mp4
ANSYSAIM_160_SpaceClaimAIMOverview.mp4
ANSYSAIM_160_StaticStructuralOverview.mp4
ANSYSAIM_160_SteadyStateThermalOverview.mp4
ANSYSAIM_160_ThermalElectricConductionOverview.mp4
ANSYSAIM_160_Workflow_ChineseCaptions.mp4
ANSYSAIM_160_WorkspaceQuickTour_ChineseCaptions.mp4
ANSYS Aqwa
Aqwa_Intro_14.5_v1.zip
ANSYS Autodyn
Training Material
Name Size Last Modified
Autodyn_Advanced_User_Subroutines_15.0_v1.zip
Autodyn_Part_ii_Introduction_16.0_v1_part1.zip
Autodyn_Part_ii_Introduction_16.0_v1_part2.zip
Video Lessons
Using Springs and Parallel Processing in ANSYS Explicit Dynamics_15.0.mp4
ANSYS BladeModeler
Training Material
BladeModeler_Introduction_15.0_v1.zip
Video Lessons
Blade_Geometry_From_CAD_Import.mp4
ANSYS CFX
Training Material
CFX_Combustion_Radiation_15.0_v1.zip
CFX_FSI_14.5_v1.zip
CFX_Introduction_15.0_v2.zip
CFX_Introduction_16.0_v1.zip
CFX_Multiphase_14.5_v3.zip
CFX_Turbulence_14.5_v1.zip
Tutorials
ANSYS CFX Tutorials.pdf
Axial_R160.zip
BluntBody_R160.zip
BubbleColumn_R160.zip
Bump2D_R160.zip
Buoy_R160.zip
Buoyancy2D_R160.zip
CatConv_R160.zip
CentrifugalCompressor_R160.zip
CircVent_R160.zip
CoalCombustion_R160.zip
Combustor_R160.zip
DropCurve_R160.zip
FourierBladeFlutter_R160.zip
FourierBladeRow_R160.zip
FourierInletDisturbance_R160.zip
HVAC_R160.zip
HeatingCoil_R160.zip
Hydrofoil_R160.zip
ImmersedSolid_R160.zip
InjectMixer_R160.zip
MultiphaseMixer_R160.zip
NonNewton_R160.zip
OscillatingPlate_R160.zip
PipeValve_R160.zip
Reactor_R160.zip
SprayDryer_R160.zip
StaticMixerRM_R160.zip
StaticMixerSA_R160.zip
StaticMixerWB_R160.zip
SteamJet_R160.zip
TimeBladeRow_R160.zip
TimeInletDisturbance_R160.zip
ValveFSI_R160.zip
WaterVapor_R160.zip
WingSPS_R160.zip
Video Lessons
ANSYS BladeModeler 18.0- Importing CAD Blade Geometry.mp4
ANSYS BladeModeler Overview- Design of a Centrifugal Compressor.mp4
ANSYS BladeModeler- Importing CAD Blade Geometry.mp4
ANSYS CFX- Blade Tip Support In Turbo Setup.mp4
ANSYS CFX- Describing Conjugate Heat Transfer in a Transient Blade Row Problem Part 1.mp4
ANSYS CFX- Describing Conjugate Heat Transfer in a Transient Blade Row Problem Part 2.mp4
ANSYS CFX- Flank Milling Overview.mp4
ANSYS CFX- Inlet and Outlet Trimming in TurboGrid.mp4
ANSYS CFX- Meshing of a Turbofan with a Meridional Splitter in TurboGrid.mp4
ANSYS CFX- Modeling Fluid Flow in a Vaned Volute using FT-TRS.mp4
ANSYS CFX- Modeling Fluid Flow in a Vaneless Volute using FT-TRS Part 1.mp4
ANSYS CFX- Modeling Fluid Flow in a Vaneless Volute using FT-TRS Part 2.mp4
ANSYS CFX- Modeling Multi-Row Influence on a Stator using Frozen Gust Analysis Part I.mp4
ANSYS CFX- Modeling Multi-Row Influence on a Stator using Frozen Gust Analysis Part II.mp4
ANSYS CFX- Modelling Blade Flutter with Harmonic Analysis.mp4
ANSYS CFX- Multi-Stage Time Transform for a 1.5 Stage Aachen Turbine.mp4
ANSYS CFX- Nozzle Design Optimization Part I.mp4
ANSYS CFX- Nozzle Design Optimization Part II.mp4
ANSYS CFX- Performance Mapping.mp4
ANSYS CFX- Real-Time Solution Monitoring.mp4
ANSYS CFX- Simplified Compressor Design and Evaluation using Turbo Setup.mp4
ANSYS CFX- TurboGrid CAD Support.mp4
ANSYS CFX- User Locations in Transient Simulations.mp4
ANSYS CFX- Using Derived Variables and Monitor Statistics to Set Up an interrupt Control.mp4
ANSYS System Coupling- Describing Thermal Diffusion using Mechanical and CFX.mp4
ANSYS TurboGrid- High Quality Mesh Generation within an Iterative Design Process.mp4
ANSYS TurboGrid- Mesh and Topology Improvement.mp4
ANSYS TurboSystem- Design and Analysis of a Pump Impeller - Part 1.mp4
ANSYS TurboSystem- Design and Analysis of a Pump Impeller - Part 2.mp4
ANSYS Vista TF- Early Phase Centrifugal Compressor Design Optimization.mp4
Analyzing Fluid Structure Interaction with ANSYS CFX and Mechanical - Part I.mp4
Analyzing Fluid Structure Interaction with ANSYS CFX and Mechanical - Part II.mp4
Blade Flutter Modelling using the Fourier Transformation Method
Restarting a Coupled Analysis in ANSYS CFX and Mechanical.mp4
Simultaneously Post-Processing a Single Case Using FCC or RAW Mode.mp4
DVD-02
ANSYS CFD
ANSYS CFD-Post
ANSYS Composite PrepPost
ANSYS Customization Suite
ANSYS DesignModeler
ANSYS DesignXplorer
ANSYS Designer
ANSYS DesignerRF
ANSYS DesignerSI
ANSYS EKM
ANSYS Explicit STR
ANSYS Fluent Meshing or Tgrid
ANSYS HFSS
ANSYS ICEM CFD
ANSYS Icepak
ANSYS LS-DYNA
ANSYS Mechanical
DVD-03
ANSYS Fluent
Training Material
Fluent_Aeroacoustics_14.5_v1.zip
Fluent_Custom_Input_Parameters.zip
Fluent_DPM_Sprays_15.0_v1.zip
Fluent_Dynamic_Mesh_14.5.zip
Fluent_FSI_15.0_v1.zip
Fluent_Heat_Transfer_15.0_v1.zip
Fluent_Introduction_16.0_v2.zip
Fluent_Meshing_Intro_16.0_v1.zip
Fluent_Multiphase_15.0_v1.zip
Fluent_Preprocessing_in_Workbench_14.5_v1.zip
Fluent_RBF_Morph_15.0_v1.zip
Fluent_Rotating-Machinery_14.5_v1.zip
Fluent_Turbulence_15.0_v1.zip
Fluent_UDF_15.0_v1.zip
Tutorials
1way-Transient-FSI-ACT-Workshop-15.0.pdf
1way-Transient-FSI-ACT-Workshop-15.0.zip
ANSYS Fluent Advanced Add-On Modules.pdf
ANSYS Fluent Tutorial Guide.pdf
Coriolis-Flow-Meter-FSI-Workshop-15.0.pdf
Coriolis-Flow-Meter-FSI-Workshop-15.0.zip
Reed-Valve-FSI-Workshop-15.0.pdf
Reed-Valve-FSI-Workshop-15.0.zip
adjoint_cylinder_R160.zip
battery_cell_R160.zip
battery_pack_R160.zip
cavitation_R160.zip
do_rad_R160.zip
dynamic_mesh_R160.zip
elbow-workbench_R160.zip
eulerian_granular_heat_R160.zip
eulerian_multiphase_granular_R160.zip
evaporate_liquid_R160.zip
external_compressible_R160.zip
introduction_R160.zip
mix_eulerian_multiphase_R160.zip
mixing_plane_R160.zip
multiple_rotating_R160.zip
non_conformal_mesh_R160.zip
non_premix_combustion_R160.zip
parallel_process_R160.zip
periodic_flow_heat_R160.zip
porous_R160.zip
postprocess_R160.zip
radiation_natural_convection_R160.zip
single_rotating_R160.zip
sliding_mesh_R160.zip
solidification_R160.zip
species_transport_R160.zip
surface_chem_R160.zip
unsteady_compressible_R160.zip
vof_R160.zip
workbench-parameter-tutorial_R160.zip
Video Lessons
ANSYS Fluent Meshing- Conjugate Heat Transfer.mp4
ANSYS Fluent Meshing- Geometry Preparation Tools for Complex Automotive Geometries.mp4
ANSYS Fluent Meshing- Interface Enhancements (17.0).mp4
ANSYS Fluent Meshing- Multibody Import and Parallel Prism Mesh (17.0).mp4
ANSYS Fluent Meshing- Objects and Zones - Management and Display Tools (16.0).mp4
ANSYS Fluent Meshing- Region-by-Region Meshing Workflows (17.0).mp4
ANSYS Fluent Meshing- Surface Mesh Preparation (16.0).mp4
ANSYS Fluent Meshing- Volume Mesh (16.0).mp4
ANSYS Fluent Meshing- Wrapping a Combustor Geometry Part 1 - Geometry Preparation (17.0).mp4
ANSYS Fluent Meshing- Wrapping a Combustor Geometry Part 2 - Wrapping (17.0).mp4
ANSYS Fluent- Basic Post-processing.mp4
ANSYS Fluent- Burning Glass Effect Modeling Using the Monte Carlo Radiation Model.mp4
ANSYS Fluent- Complete Meshing-to-Postprocessing Workflow.mp4
ANSYS Fluent- Describing Cavitation in a Centrifugal Pump.mp4
ANSYS Fluent- Describing Non-premixed Combustion using the Steady Flamelet Model.mp4
ANSYS Fluent- Diffusion Controlled Reacting Flow in a Can Combustor.mp4
ANSYS Fluent- ECM Battery Model.mp4
ANSYS Fluent- Evaluating the Performance of a Centrifugal Pump with a Volute.mp4
ANSYS Fluent- General Usability Improvements.mp4
ANSYS Fluent- Introduction to Overset Meshing.mp4
ANSYS Fluent- Modeling Robotic Arm Airflow Using Relative Motion of Overset Meshes.mp4
ANSYS Fluent- Nozzle Design Optimization - Part 1.mp4
ANSYS Fluent- Nozzle Design Optimization - Part 2.mp4
ANSYS Fluent- Overset Meshing and Dynamic Meshes.mp4
ANSYS Fluent- Overview of GPU Capabilities.mp4
ANSYS Fluent- Overview of the Mapped Interface Technique for CHT Simulations.mp4
ANSYS Fluent- PEM Fuel Cell (PEMFC) Model Overview.mp4
ANSYS Fluent- Postprocessing Simulation Results on Irregular Surfaces.mp4
ANSYS Fluent- Scene and Animation Creation.mp4
ANSYS Fluent- Simulating Multiphase Mixing within a Sparging Tank.mp4
ANSYS Fluent- Using the Adjoint Solver to Optimize the Shape of a Duct in a Bounded Space - Part I.mp4
ANSYS Fluent- Using the Adjoint Solver to Optimize the Shape of a Duct in a Bounded Space - Part II.mp4
ANSYS Fluent- Using the Six Degrees of Freedom (Six DOF) Solver.mp4
ANSYS Fluent- Workspace Introduction (17.0).mp4
ANSYS System Coupling- One-Way Data Transfer.mp4
Analyzing Fluid Structure Interaction with ANSYS Fluent and Mechanical - Part I.mp4
Analyzing Fluid Structure Interaction with ANSYS Fluent and Mechanical - Part II.mp4
New ANSYS Fluent Workspace Overview
Overview of the Mapped Interface Technique for CHT Simulations in ANSYS Fluent
Postprocessing simulation results on irregular surfaces in ANSYS Fluent
Setting Up a Dynamic Mesh Problem in ANSYS Fluent For a Piston and Reed Valve
Using ANSYS Fluent Mesh Morpher-Optimizer in Workbench 16.0
DVD-04
ANSYS Fluent
ANSYS Maxwell
ANSYS Mechanical APDL
ANSYS Meshing
ANSYS PExprt
ANSYS Polyflow
ANSYS Q3D Extractor
ANSYS Remote Solver Manager
ANSYS SIwave
ANSYS Simplorer
ANSYS SpaceClaim
ANSYS SpaceClaim Direct Modeler
ANSYS TurboGrid
ANSYS Workbench
ANSYS nCode DesignLife
System Coupling
others
======================================================================
This DVDs are only suitable for a PC/laptop/Mac; it WILL NOT play on a TV
======================================================================
No comments:
Post a Comment